ASI 9013 Baby Changing Station, Recessed-Mounted, Stainless Steel

The ASI 9013 Recessed Mounted Baby Changing Station provides a sturdy changing area for diapering in your commercial restrooms. The unit features a recessed design that requires a rough opening that measures 34-1/4 inches in width by 22-3/4 inches in height by 3-3/4 inches in depth. Designed for one-handed operation so that it's easy to open and close while holding a baby, the changing station is crafted from type-304 stainless steel. The door is fashioned out of 16-gauge metal, while the cabinet and flange are manufactured out of 18-gauge steel. The baby changing station is capable of supporting up to 400 pounds of weight and has a concave surface outfitted with safety straps to protect babies during diapering. Fully compliant with ADA and other barrier-free accessibility guidelines, the changing surface is covered with an impact-resistant plastic that is easy to clean and maintain. Two bag hooks and dispensers for bed liners and paper towels are included in the design.

From the Manufacturer
ADA-compliant unit features welded stainless steel for long and reliable use. Exposed surfaces are satin finish. Easy one-handed operation is assisted by a pull handle and concealed spring. The changing surface is high-impact-resistant plastic for easy cleaning. Its two part adjustable safety strap and 400 lb. (181 kg) load capacity assure child protection.

From the Tech Data

SPECIFICATION
Recessed Stainless Steel Baby Changing Station shall protrude no more than 3/8" [10] form wall when in retracted position. Door, flange and cabinet shall be type 304 stainless steel, all welded construction. All exposed surfaces shall be polished to a satin finish. The door shall be 16 gauge [1,5] and the flange and cabinet shall be 18 gauge [1,2]. The changing table shall be equipped with a rounded contoured pull handle and shall have a concealed damped gas spring to assist user in opening and closing unit with one hand. The bed liner shall be light gray, high impact plastic with a smooth finish for easy cleaning. The liner shall be shaped to cradle a child’s body and shall be equipped with an adjustable two-part child protection safety strap and cam buckle adjustable with one hand. Unit shall include two bag hooks, bed liner dispenser, and a C-fold towel and multi-fold towel dispenser which can easily be converted to a multi-fold towel dispenser that needs no adapters. Unit shall have a minimum holding capacity of 400 lbs (181,4 kg). The strength of the supporting wall and hardware must be adequate to support the rated load. Unit shall provide graphic and instructions in 4 languages. Unit shall comply with ASTM F-2285, G-21, G-22 and ANSI Z535 and shall be warranted for five (5) years against defects in material or workmanship.

Recessed Stainless Steel Baby Changing Station shall be Model № 9013 as manufactured by American Specialties, Inc. 441 Saw Mill River Road Yonkers, New York 10701-4913

INSTALLATION
Provide rough wall opening 34-1/4" [870] wide x 22-3/4" [578] high x 3-3/4" [95] minimum depth from face of finished wall. Mount unit in wall opening using either four (4) №10 x 1-1/2" [38] long self-threading screws through side holes or four (4) 3/8" x 2" [Ø10 x 51] lag screws (or other fasteners appropriate for wall conditions, not supplied) through mounting holes in rear wall of cabinet. Use washers and snap covers provided. For compliance with 2010 ADA Accessibility Standards install unit so that top edge of changing table is 32" to 32-3/8" [813 to 822] above finished floor (AFF). See installation instructions packed with unit.

Rough Wall Opening (RWO) required is 34-1/4" [870] W x 22-3/4" [578] H x 3-3/4" [95] D minimum

OPERATION
Pull down changing table is counterbalanced with a damped gas spring and can be opened or closed with one hand. Unit is operable with less than 5 lb sf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Secure the child in place by using child protection safety strap. The safety strap and cam buckle are assembled by sliding the safety strap into the cam buckle until it is snug on child. Tighten or loosen the strap by pulling the strap end through and clamping the buckle. To unbuckle the strap simply lift the buckle lever.