Bobrick B-221 Commercial Toilet Seat Cover Dispenser, Surface-Mounted, Stainless Steel

• Classic Series
• Satin-finish stainless steel 
• Dispenses 250 single or half-fold toilet seat covers or one box
• Fills from bottom
• 15.75" W, 11" H, 2" D (400 x 280 x 50mm)
• Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit

Satin-finish stainless steel. Dispenses 250 single or half-fold toilet seat covers or one box. Fills from bottom. Unit 15 3/4" W, 11" H, 2" D (400 x 280 x 50mm). Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit.

From Tech Data:

MATERIALS:
18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. All-welded construction with beveled opening.

OPERATION: Dispenses single- or half-fold paper toilet seat covers from beveled opening. Dispenser fills from bottom through concealed opening. Capacity: 500 toilet seat covers.

INSTALLATION: Mount unit on wall or toilet partition with two flat-head screws, not furnished by manufacturer, at points indicated by an S. For plaster or dry wall construction, provide concealed backing that complies with local building codes, then secure unit with flathead screws not furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws, not furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts.

Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room for filling dispenser from bottom.

SPECIFICATION: Surface-mounted toilet-seat-cover dispenser shall be type-304, 22-gauge (0.8mm) stainless steel with all-welded construction; exposed surfaces shall have satin finish. Dispenser shall have a concealed opening in bottom for filling. Capacity shall be 500 paper toilet seat covers.