- Bobrick ConturaSeries
- Satin-finish stainless steel
- Dispenses 250 single- or half-fold toilet seat covers or one box
- Fills from bottom
- Unit 15-3/4" W, 11" H, 2" D (400 x 280 x 50mm)
- Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit
Satin-finish stainless steel. Dispenses 250 single- or half-fold toilet seat covers or one box. Fills from bottom. Unit 15 3/4" W, 11" H, 2" D (400 x 280 x 50mm). Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit.
MATERIALS:
18-8, type-304, 20-gauge (1.0mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of dispenser has same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges complement other ConturaSeries accessories.
OPERATION:
Dispenser holds single- or half-fold paper toilet-seat covers. Dispenser fills from bottom through concealed opening. Capacity: 500 toilet seat covers.
INSTALLATION:
Mount unit on wall or partition of toilet compartment with two screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with #8 x 1-1/2'' (4.2 x 38mm) sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room for filling dispenser from bottom.
SPECIFICATION:
Surface-mounted toilet-seat-cover dispenser shall be type-304, 20-gauge (0.9mm) stainless steel with drawn, one-piece, seamless construction; exposed surfaces shall have satin finish. Front of toilet-seat-cover dispenser shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom. Radius on corners and edges of toilet-seat-cover dispenser shall complement other Bobrick ConturaSeries washroom accessories. Unit shall have a rectangular opening fo
| Total Recycled Content | 65% |
| Width | 15 3/4 Inches |
| Depth | 2 3/16 Inches |
| Height | 11 1/4 Inches |
| Material | Stainless Steel |
| Style | Surface Mounted |
| Type | Dispensers |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Work with the Restroom Experts.
Scott
Chad
Jonathan
Jeremy
Paul
Erik
Jay
